Configuring Snmp In The Codec - Tieline ViA User Manual

310 ViA User Manual v2.0

31.25 Configuring SNMP in the Codec

The codec supports Simple Network Management Protocol (SNMP ) for managing devices on IP
networks. To use SNMP you need to configure SNMP Device settings in your codec.
Description of SNMP Settings in the Codec
Features
Codec Name
Codec Location
Contact
R/O Community
R/W Community
Configuring SNMP Settings in the Codec
1. Open the HTML5 Toolbox Web-GUI and click Settings at the top of the screen, then click
Options to display the Options panel.
2. Click in the text boxes to enter SNMP configuration settings.
4. Click Save to store the new configuration.
Operation Button Descriptions
A user-specified alphanumeric identifier which may be used by third-
party SNMP software to identify a device. The device name
corresponds to
2.system.sysName" SNMP attribute and is completely independent
of DNS, NIS, WINS or other device naming and identification
schemes, though convention is to use the device's fully-qualified
domain name.
A user-specified alphanumeric string which may be used by third-
party SNMP software to identify a device. Device location
corresponds to
2.system.sysLocation" SNMP attribute.
A text identifier for the contact person for this managed node,
together with information on how to contact this person.
SNMP provides two types of access, namely Read-Only access and
Read-Write access. The R/O Community identifier allows Read Only
level access.
The R/W Community identifier allows Read/Write level access.
the ".iso.org.dod.internet.mgmt.mib-
the ".iso.org.dod.internet.mgmt.mib-
© Tieline Pty. Ltd. 2017