Tieline ViA User Manual page 124

124 ViA User Manual v2.0
Dialing Method (Affects Dialing only)
Use this menu to select Tone (DTMF) or Pulse dialing over POTS Codec connections. Tone
dialing (default) is used always when the Answer Mode is Analog Phone.
Dial Tone Detect (Affects Dialing only)
There are two settings in this menu:
·
Wait For Dial Tone: The module will only dial when a dial tone is present on the line
(default).
·
Blind Dialing: Allows the module to dial when no dial tone is present.
Monitor Modem Tone (Affects Dialing and Answering)
Tap the On/Off button to Enable (default) or Disable this feature. If enabled the module will
allow audio monitoring of modem tones via the phone input during POTS Codec mode
connections.
© Tieline Pty. Ltd. 2017