Tieline ViA User Manual page 220

220 ViA User Manual v2.0
interface and for another it may be a USB cellular interface. This allows you to configure site-
specific settings to suit the available network interfaces at different remote locations.
1. Open the HTML5 Toolbox Web-GUI and click Settings and then click IP Via Mapping
to open this panel.
2. Click the drop-down arrow for each interface to select the preferred default setting.
3. Click Save to store the configuration.
Important Note: Fuse-IP cannot be configured as a default Primary, Secondary or
Tertiary Via.
Configuring QoS
The codec can be configured to tag IP data packets sent across a network by entering a value into
the Differentiated Services Code Point (DSCP) field within the header of data packets transmitted
over the network.
1. Open the HTML5 Toolbox Web-GUI and click Settings and then click Options to open the
Options panel.
2. Click in the DSCP field and enter the priority setting recommended by your IT administrator.
3. Click Save to store configuration settings.
Important Note: Check with your IT administrator before changing this setting. By default
the codec is configured for Assured Forwarding and more details about DSCP are
available on Wikipedia at http://en.wikipedia.org/wiki/Dscp.
© Tieline Pty. Ltd. 2017