Tieline ViA User Manual page 38

38 ViA User Manual v2.0
4. Tap to select a sample rate. Note: multiple sample rate options are available for algorithms
like MP2, MP3, AAC and aptX Enhanced.
5. Tap to select the initial connection bit-rate.
6. Tap Destination to connect over an IP LAN (using an automatically assigned DHCP IP
address).
7. Tap Destination to enter the IP address of the codec you are dialing, then tap Done in the
top right-hand corner of the TOUCH SCREEN. Note: tap the Dial History
select a previously dialed number.
8. Tap Via to select a specific dialing interface in the Select Via screen, or use the default
Any setting. Tap Save in the top right-hand corner of the screen to dial using the default
Any setting. This setting uses the first available interface based on the following default
priorities.
·
Primary = LAN1.
·
Secondary = LAN2.
symbol to
© Tieline Pty. Ltd. 2017