Tieline ViA User Manual page 267

port LAN2. The redundant stream uses Remote Audio Port 9011 by default, and
provides automatic IP streaming backup in case one IP connection fails.
Important Note: Dual SmartStream PLUS redundant streaming over both Ethernet ports
mitigates lost packets on either link and will provide IP network backup if an IP link is
lost. To learn more about SmartStream PLUS redundant IP streaming see
http://www.tieline.com/Transports/SmartStream-IP
For ISDN connections enter a number and select which B channel to use. Select the
Enable bonded connections check-box to configure and bond multiple B channels.
Next, click Save Program to save the program with default algorithm settings, or click
Next to specify a different algorithm and configure a backup connection if required.
(recommended). Dialing settings for this ISDN audio stream are now complete.
Select POTS Codec in the Mode drop-down menu to encode/decode using POTS, or
select Analog Phone to configure a standard analog phone call, then click Next.
Next, enter the phone number of the codec or device you want to dial. Next, click Save
Program to save the program with default settings, or click Next to specify algorithm
settings and configure a backup connection if required (recommended).
Dialing configuration settings for this POTS audio stream are now complete.
5. Continue through the steps in the wizard to complete configuration in the same way as the
first connection was configured. Then click Save Program to complete configuration, then
click Finish to exit the wizard.
6. The newly created program will be displayed in the left pane within the Program Manager
panel and in the Program Loader panel.
using the Connections panel, or
© Tieline Pty. Ltd. 2017
Select and connect audio streams
dial a program manually
ViA User Manual v2.0
in a program
using the codec front panel.
267