Tieline ViA User Manual page 217

As an example, if only one physical Ethernet interface is available, VLANs or USB interfaces can be
used to stream SmartStream PLUS audio or separate codec control and streaming functions as
required. IP interfaces can be configured for:
·
Controlling audio: codec control and command only from a selected IP interface.
·
Controlling and Streaming: stream audio and control and command the codec from a selected
IP interface.
·
Streaming audio: stream audio only from a selected IP interface.
·
Nothing: Disable the Ethernet port from streaming audio and codec command and control
(VLANs only).
Select the Details tab in the Network panel to edit control and streaming settings. Select the
Enable check-box to activate each interface. LAN1 and LAN2 are enabled by default. Note: An
interface with a green status indication is enabled and has an active LAN cable attached. A LAN
interface with red text and a yellow status indication is enabled, however a network cable is not
attached, e.g. LAN2 in the following image. An interface in red text with a red status indication is
disabled, e.g. VLANs in the following image.
IPv4 Address Configuration
Click to select the TCP/IP tab in the Network panel to configure settings. The codec is capable of
automatic DHCP address assignment, or manually configured static IPv4 address configuration via
the drop-down Configure IPv4 drop-down menu. If you want to ignore IPv4 settings select Off.
DHCP IP addresses are automatically assigned and can change each time you connect to your
Internet Service Provider, or to your own local area network (LAN). By default the codec is
configured for DHCP-assigned IP addresses.
© Tieline Pty. Ltd. 2017
ViA User Manual v2.0 217