Tieline ViA User Manual page 253

6 Maximum Retries
7 Time Frame
2. Enter a name for the backup connection and click Next.
3. Click Next to continue through the wizard and configure the backup connection in a similar
manner to how you configured the primary connection.
Configuring ViA to Answer Connections
The codec is capable of being configured to accept calls via different transports (e.g. IP, ISDN and
POTS), or to accept calls using different audio ports. To answer one or more incoming audio stream
connections:
1. Enter a name for the answering connection and click Next.
2. Configure the transport settings:
For IP select the Session Protocol and Audio Port.
© Tieline Pty. Ltd. 2017
connection
The maximum number of fail back retries a codec can try
before ending fail back attempts
The time frame used to measure the number of fail back
retries attempted
Important Note: The Local Audio Port is the port used by the local codec to
receive audio from the remote codec. When Tieline Codecs is the Session
Protocol selected (using Tieline session data), the Local Audio Port is
automatically configured as UDP audio port 9000 by default for the first audio
stream connection. Click to deselect the Any check-box to adjust this setting.
ViA User Manual v2.0 253