Managing Failover - Tieline ViA User Manual

Managing Failover

24.2
If a primary and backup connection are configured in a program, the codec supports automatically
failing over to a backup connection according to Backup data loss parameters. It can also
automatically fail back to the original connection according to Auto Resume parameters. It is also
possible to manually fail over to a backup connection, and fail back to the original connection, using
the Connection Details screen.
Manually Fail Over
To manually fail over to a backup connection:
1. Swipe left to navigate from the Connections Screen to the Connection Details screen.
2. Tap the Failover button, then tap Failover in the confirmation dialog to disconnect the
primary connection and connect the backup connection.
Manually Fail Back
To manually fail back to the primary connection:
1. Tap the Fail Back button, then tap Fail Back in the confirmation dialog to disconnect the
backup connection and reconnect the primary connection.
© Tieline Pty. Ltd. 2017
ViA User Manual v2.0 105