Repeater Mode (Cardbus Adapter); Point-To-Point Mode; Figure 4 Extension Of Wired Network Topology - UTStarcom WA3001 User Manual

8 Chapter 2 System Application

Figure 4 Extension of Wired Network Topology

Repeater Mode (CardBus Adapter)

Point-to-Point Mode

Point-to-Point mode is used to connect two networks in WLAN
application.
E.g.: In a campus, using WA3001's point-to-point mode to
connect two buildings in a separate wired network. In this mode,
AP must to be configured with a cardBus adapter to function as
a repeater.