Dot1X Encryption-Mode; Dot1X Initialize - UTStarcom WA3001 User Manual

Mode: local, remote, local-remote, remote-local
Default value: local-remote
Access level: 2

Dot1x Encryption-Mode

Use this command to set the authentication encryption mode for
each port.
Syntax: dot1x encryption-mode <port> {chap|pap}
no dot1x encryption-mode <port>
Possible value:
Port: lan, wlan1, wlan2
chap|pap: keyword
default value: pap
Access level: 2

Dot1x Initialize

Use this command to initialize an 802.1x's user based on the
user ID.
Syntax: dot1x initialize <userid>
Chapter 9 CLI Command Set 133