Dot1X Re-Authentication - UTStarcom WA3001 User Manual

136 Chapter 9 CLI Command Set
re-authentication attempts (re-authperiod) and automatic re-
authentication.
Syntax: dot1x re-authenticate <userid>
Possible value: userid: 1-256
Access level: 2
Explanation: Use this command to manually initiate a re-
authentication for a subscriber at once.

Dot1x Re-Authentication

Use this command to enable periodic re-authentication of the
client. Use the no form of this command to return to the default
setting. Configure the time period between periodic re-
authentication attempts by using the dot1x re-authperiod
command.
Syntax: [no] dot1x re-authentication <userid>
Possible value: userid: 1-256
Default value: Periodic re-authentication is disabled
Access level: 2
Explanation: Use this command to set the periodic re-
authentication status while the subscriber is online.