Snmp Server Location; Snmp Server Sysname; Snmp Server Trap Enable/Disable - UTStarcom WA3001 User Manual

160 Chapter 9 CLI Command Set
Default value: SNMP agent is enabled
Access level: 2

SNMP Server Location

Use this command to set SNMP server location string.
Syntax: snmp server location <location>
Possible value: any text up to 255 characters
Access level: 2

SNMP Server Sysname

Use this command to set SNMP server system name string.
Syntax: snmp server sysname <sysname>
Possible value: Any text up to 255 characters
Access level: 2

SNMP Server Trap Enable/Disable

Use this command to enable or disable SNMP trap.
Syntax: snmp server trap {enable|disable}