Show; Show Arp; Show Console - UTStarcom WA3001 User Manual

Explanation:
Execute this command, and the following will be displayed:
IP debug
ICMP debug
TCP debug
UDP debug
IGMP debug

Show

Show ARP

Use this command to display ARP entries.
Syntax: show arp
Access level: 0

Show Console

Use this command to display the console config information,
such as baud-rate, console session time-out and so on.
Syntax: show console
Access level: 0
Explanation:
Chapter 9 CLI Command Set
: On
: Off
: On
: Off
: On
195