Privileged Exec Commands; Configure; Copy Config To Tftp - UTStarcom WA3001 User Manual

Access level: 2
Explanation: Use this command to save the running
configuration into the startup-config file.

Privileged EXEC Commands

Configure

Use this command to reach the global CONFIG level.
Syntax: configure {terminal}
Access level: 1

Copy Config to TFTP

Use this command to upload a copy of the configuration file to
the designated TFTP server.
Syntax: copy config to tftp <ip-address> <filename>
Possible value: ip-address: IP address of the TFTP server
filename: Up to 32 characters for the designated file name on
the TFTP server
Access level: 2
Chapter 9 CLI Command Set 121