Load-Balance Mode
Use this command to set load-balance mode.
Syntax: load-balance mode {user-base | flux-base}
Default Value: user-base
Access level: 2
MAC Age Time
Use this command to set the aging period for all MAC address
entries in the address table of the switch.
Syntax: mac age time <value>
Possible value: value: 10~65535 seconds
Default value: 300 seconds
Access level: 2
MAC Black-List
Use this command to add/delete a MAC black list entry. The
packets from the source MAC addresses will not be permitted to
access the AP.
Syntax: [no] mac black-list <mac-address>
Chapter 9 CLI Command Set
145