Table of Contents
Advertisement
Debug Mode
Ping
Use this command to test the network layer connectivity
between source and destination address. This command is a
global command and can be used at any configuration level.
Syntax: ping <ip-address> [times <times>] [packet-size <size>]
Possible value: ip-address: Specifies the network layer
destination address .
Times: Specifies the packets to send. Possible values are 1-
10000.
packets-size: Specifies the data size of ICMP packet. 0-65000.
Access level: 2
Explanation: Use this command to test the network layer
connectivity
Debug-Module
Use this command to enable or disable every module's debug
message
Syntax: debug-module <module-name> <level>
Chapter 9 CLI Command Set
189
Advertisement
Table of Contents
