Basic Rate - UTStarcom WA3001 User Manual

no beacon interval
Possible value: times: 20-1000
Default value: 100
Access level: 2
Explanation: Use this command to set wireless card beacon
frame send interval

Basic Rate

Use this command to set the transmission rate of this wireless
card
Syntax: basic rate < 2 | 11|12|g >
Possible value:
value: 2: 1,2Mbit/s at b mode or b/g mode
11: 1,2,5.5,11Mbit/s at b mode or b/g mode
12: 6, 9,12. at g mode
g: 1,2,5,5,11,6,9,12Mbit/s at b/g mode
Access level: 2
Chapter 9 CLI Command Set 175