Nat Logging; Nat Print - UTStarcom WA3001 User Manual

190 Chapter 9 CLI Command Set
no debug-module [module-name]
Possible value: module name: DOT1X, SMI, RADIUS, DHCPS,
DHCPR, DHCPC, IP, NAT, BRIDGE,DOT11, WEB, CLI, SNMP,
TELETE, L2TP, PPP, PPPOEC
level: ERROR, WAINING, TRACE
Access level: 2

NAT Logging

Use this command to set NAT logging information.
Syntax: nat logging [detail|data]
no nat logging [detail|data]
Possible value: detail|data: keywords
Access level: 2

NAT Print

Use this command to set NAT print information
Syntax: nat print {detail|data|error}
no nat print {detail|data|error}
Possible value: detail|dat|error: keywords