Excluded-Address - UTStarcom WA3001 User Manual

Chapter 9 CLI Command Set 169
Possible value: address: Specifies the IP address of a DNS
server. One IP address is required. The user can specify up to
four addresses in one command line.
address2...address4: (Optional) Specifies up to four addresses
in the command line
Default value: If DNS IP servers are not configured for a DHCP
client, the client cannot correlate host names to the IP
addresses.
Access level : 2
Explanation: Use this command to set/remove DNS server(s).

Excluded-Address

Use the excluded-address global configuration command to
specify IP addresses that a DHCP Server should not assign to
DHCP clients. To remove the excluded IP addresses, use the
no
form of this command. (Up to 8)
Syntax: excluded-address <low-address> [high-address]
no excluded-address <low-address> [high-address]
Possible value: low-address: The excluded IP address or first
IP address in the excluded address range.