Table of Contents
Advertisement
196
Chapter 9 CLI Command Set
Execute this command, and the following will be displayed:
Baud rate
: 9600
Timeout
: 30 minutes
Parity
: no
Data bits
: 8
Stop bits
: 1
Flow control : disable
Show DHCP-Client
Use this command to display the DHCP client configuration.
Syntax: show dhcp-client
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
DHCP status
DHCP server
DHCP trusted server: 1.1.1.1
Show DHCP Service
Use this command to display the current DHCP service (RELAY
or SERVER) in the system.
: enable
:
Advertisement
Table of Contents
