Table of Contents
Advertisement
156
Chapter 9 CLI Command Set
no radius-authserver host {first | second | third}
Possible Value:
authentication server host.
Access level: 2
RADIUS-Authserver Info
Use this command to set the designated authentication server's
parameter(s). Use the no form of this command to set the
designated authentication server's parameter(s) as default
value(s).
Syntax: radius-authserver info {first | second | third} [auth-
port <port-number>] [authentication-key <string>]
<seconds >] [dead-time <minutes>] [retransmit <retries >]
no radius-authserver info {first | second | third} [auth-port]
[authentication-key] [timeout] [dead-time] [retransmit]
Possible Value:
auth-port: 1-65535; default value: 1812
authentication-key <string>:string; default value: ""
timeout: 1-16 seconds; default value: 5 seconds
dead-time: 1-1440 minutes; default value: 5 minutes
ip-address: IP address of the RADIUS
[timeout
Advertisement
Table of Contents
