Radius-Authserver {Enable | Disable; Radius-Authserver Extra; Radius-Authserver Host - UTStarcom WA3001 User Manual

RADIUS-Authserver {Enable | Disable}

Use this command
authentication server.
Syntax: radius-authserver {enable | disable} [first | second |
third]
Access level: 2

RADIUS-Authserver Extra

Use this command to set authentication radius server's
additional attribute.
Syntax: radius-authserver extra {first | second | third}
[iapp|wpa]
Possible value: iapp|wpa: keywords
Access level: 2

RADIUS-Authserver Host

Use the radius-authserver host global configuration command
to specify a RADIUS authentication server host. The other
parameters are default.
Syntax: radius-authserver host {first | second | third} <ip-
address>
Chapter 9 CLI Command Set
to enable/disable the
155
designated