Operator Password - UTStarcom WA3001 User Manual

2 – Power configuration access
1 – Port configuration access
0 – Read only access
access-mode: Telnet, console or web. Multiple values can be
input.
Access level: 10
Note: When the operator <user-name> {level <access-level>} {mode
<access-mode>} command is entered, the system displays
"Enter new password: " and "Confirm new password: " in
next line, the user should input the correct password.

Operator Password

Use this command to change the user's password whose name
is <username>.
Syntax: operator password <user-name>
Possible value: user-name: Up to 16 alphanumeric characters
for the user name
Access level: 1
Note: When the command "user password <user-name>" is entered,
the system displays
administrator, this line will not be displayed.), "Enter new
Chapter 9 CLI Command Set
"Enter old password: " (For system
151