Nat Interface; Nat Map - UTStarcom WA3001 User Manual

NAT Interface

Use this command to specify the interface attached to NAT.
Syntax: nat interface {inside | outside} <lan | wan>
Default value:
inside: lan(downlink)
outside: wan (uplink)
Access level: 2

NAT Map

Use this command to configure static entries of address
mapping for basic NAT.
Syntax: [no] nat map <local-ip> <global-ip>
Possible value:
local-ip: Private IP address inside NAT .
global-ip: Global IP address outside NAT.
Access level: 2
Chapter 9 CLI Command Set 147