Table of Contents
Advertisement
178
Chapter 9 CLI Command Set
RTS-CTS Threshold
Use this command to set RTS/CTS threshold. If the TX MPDU's
length is larger than the threshold, the mechanism is enabled.
Syntax: rts-cts threshold < value>
Possible value: value: 0-2347
Default value: 2347
Access level: 2
SSID
Use this command to set the network name of the wireless card.
SSID (Service Set Identifier)
Syntax: ssid < string>
Possible value: string length: 1-32, such as 0-9, a-z, A-Z,
Access level: 2
Explanation: Use this command to set the hostname for this
card
Advertisement
Table of Contents
