132
Chapter 9 CLI Command Set
Syntax: [no]dhcp-server host <IPaddress> (Up to 3)
Possible value: ip address
Access level: 2
Dot1x Authentication Enable / Disable
Use this command to enable or disable the DOT1X
authentication function.
Syntax: dot1x authentication {enable|disable} <port>
Possible value: Port: lan, wlan1, wlan2
Default value: disable
Access level: 2
Dot1x Authentication Mode
Use this command to set the authentication mode for this AP.
Syntax: dot1x authentication mode <port> <mode>
no dot1x authentication mode <port>
Possible value:
Port: lan, wlan1, wlan2