Table of Contents
Advertisement
Show IAPP Configuration
Use this command to display IAPP configuration.
Syntax: show iapp configuration
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
IAPP config status
IAPP running status : UP
IAPP mode
ESP mode
IAPP secret
IAPP map:
MAC
----------------------------------------------
00:00:00:00:00:01
00:00:00:00:00:02
Chapter 9 CLI Command Set
: enable
: local
: enable
: *********
IP
172.18.32.5
172.18.32.4
211
Advertisement
Table of Contents
