Table of Contents
Advertisement
VLAN Tag Enable
Use this command to enable VLAN tag. The command will be
valid if the VLAN module is available.
Syntax: vlan tag enable
Access level: 2
VLAN Visitor Default Vid
Use this command to set default VLAN visitor VID. The
command will be valid if the VLAN module is available.
Syntax: vlan visitor default-vid <vid>
No vlan visitor default-vid
Possible value:
vid: 1-4094
Default value:1
Access level: 2
Webserver
Use this command to enter webserver config mode
Chapter 9 CLI Command Set
167
Advertisement
Table of Contents
