Default Wep-Key; Wep-Key-Format; Wep-Key-Length - UTStarcom WA3001 User Manual

182 Chapter 9 CLI Command Set

Default WEP-Key

Use this command to set the default WEP key based on 802.11.
Syntax: default wep-key < number>
Possible value: number: 1-4
Default value: 1
Access level: 2
Explanation: Use this command to set wireless WEP key for
this card

WEP-Key-Format

Use this command to set WEP key format.
Syntax: wep-key-format < hex | ascii >
Possible value: string: hex or ascii
Access level: 2

WEP-Key-Length

Use this command to set WEP key length.
Syntax: wep-key-length <string>