Table of Contents
Advertisement
Access level: 2
Sys-Function
Use this command to execute some system function.
Syntax: sys-function <function-name>
Possible value:
function-name: i, arpShow, ifShow, inetstatShow, ipstatShow,
netStackDataPoolShow, netStackSysPoolShow, mbufShow,
hostShow, routeShow, routeStatShow, udpstatShow,
tcpstatShow, icmpstatShow, CPUReport
Access level: 2
Show Version
Use this command to display internal version.
Syntax: show version
Access level: 2
Explanation:
Execute the command, and the following will be displayed:
Hardware version: 1.0.0.1
Chapter 9 CLI Command Set
191
Advertisement
Table of Contents
