202
Chapter 9 CLI Command Set
Show NAT Configuration
Use this command to display all NAT configuration information.
Syntax: show nat configuration
Access level: 2
Explanation:
Execute this command, and the following will be displayed:
Eable/disable , timeout value
Nat pool information(<start-ip> <end-ip> <ip-mask>)
Nat map information(<local-ip> <global-ip>)
Nat redirect information(<global-port> <local-port> <local-ip>)
Show Managed-Interface
Use this command to display the IP information of the
management interface.
Syntax: show managed-interface
Access level: 0
Explanation:
Execute this command, and the following will be displayed: