Lease - UTStarcom WA3001 User Manual

Lease

Use the lease DHCP pool configuration command to configure
the duration of the lease for an IP address that is assigned by a
Dynamic Host Configuration Protocol (DHCP) Server to a
DHCP client. To restore the default value, use the
this command.
Syntax: lease {[[days <days>]
<minutes>] ] | [ infinite]}
no lease
Possible value: days: Specifies the duration of the lease in
numbers of days
hours: Specifies the number of hours in the lease. A day's value
must be fed before configuring an hour's value.
minutes: Specifies the number of minutes in the lease. A day's
value and an hour's value must be fed before configuring a
minute's value.
Infinite: Specifies that the duration of the lease is unlimited
Default value: One day
Access level: 2
Chapter 9 CLI Command Set
no
[hours <hours>] [minutes
171
form of