Vlan Port-Vid; Vlan Tag Disable - UTStarcom WA3001 User Manual

166 Chapter 9 CLI Command Set
Default value: user-based
Access level: 2

VLAN port-vid

Use this command to set the designated port's vid.
Syntax: vlan port-vid {lan|wlan1|wlan2} <vid>
no vlan port-vid {lan|wlan1|wlan2}
Possible values:
Vid range:1-4094
Default value:1
Access level: 2
Explanation: Use this command to set the vid of designated
port when work on port-based mode.

VLAN Tag Disable

Use this command to disable VLAN tag. The command will be
valid if the VLAN module is available.
Syntax: vlan tag disable
Access level: 2