Show Telnet - UTStarcom WA3001 User Manual

206 Chapter 9 CLI Command Set
Syntax: show system
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
Serial number
System uptime
seconds
Console baudrate
Board temperature
Hardware version
Software version

Show Telnet

Use this command to display all the telnet configuration
information, such as the telnet server's status, telnet mode,
telnet session time-out and so on.
Syntax: show telnet
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
: 000008c42671
: 0 days 21 hours 27 minutes 5
: 9600
: 48.0 (C)
: 1.0.0
: 1.0.0