Nat Timeout; Operator Access Level - UTStarcom WA3001 User Manual

Syntax: [no] nat redirect <global-port> <local-ip>
Possible value:
global_port: Destination port number of incoming packets.
local_ip: Private IP address to be redirected.
Access level: 2

NAT Timeout

Use this command to set the age timeout for all NAT entries.
Syntax: nat timeout <secs>
Possible value:
secs: 1-3600
Default value: 120
Access level: 2

Operator Access level

Use this command to change the user's access level.
Syntax: operator access level {name <user-name>} {level
<access-level>}
Chapter 9 CLI Command Set 149