152
Chapter 9 CLI Command Set
password: " and "Confirm new password: " in next line, the
user should input the correct password.
PPPoE Auto-Connect Disable/Enable
Use this command to set auto connect to the PPPOE server
when the AP boots successfully.
Syntax: pppoe auto-connect {disable|enable}
Access level: 2
PPPoE Connect
Use this command to connect to the PPPOE server.
Syntax: pppoe connect
Access level: 2
PPPoE Disconnect
Use this command to disconnect from the PPPOE server.
Syntax: pppoe disconnect
Access level: 2
PPPoE User
Use this command to add a PPPoE user.