Reboot; Auto-Config Enable/Disable; Global Config Commands; Ap-Mode - UTStarcom WA3001 User Manual

Syntax: kill <session-id>
Possible value: session-id: 0 - 4
Access level: 2

Reboot

Use this command to reboot the system.
Syntax: reboot
Access level: 2

Auto-config Enable/Disable

Use this command to enable or disable auto configuration.
Syntax: auto-config enable/disable
Access level: 2

Global Config Commands

AP-Mode

Use this command to select AP work mode.
Syntax: ap-mode {bridge|route}
Chapter 9 CLI Command Set 127