198
Chapter 9 CLI Command Set
Show DHCP Server
Use this command to display DHCP server's configuration
parameters.
Syntax: show dhcp server
Access level:0
Show DHCP Statistics
Use this command to display Dynamic Host Configuration
Protocol (DHCP) Server statistics.
Syntax: show dhcp statistics [relay |server]
Default value: all statistics
Access level: 0
Show Dot1x Configuration
Use this command to display the PAE capabilities, protocol
version, and other global dot1x parameters such as max-req,
re-authperiod, server-timeout supplicant-timeout and so on.
Syntax: show dot1x
Access level: 0