Table of Contents
Advertisement
Dot1x Re-Authperiod
Use this command to set the number of seconds between re-
authentication attempts. Use the no form of this command to
return to the default setting. The dot1x re-authperiod
configuration command affects the behavior of the device only if
the user has enabled periodic re-authentication by using the
dot1x re-authentication configuration command. The user
should change the default value of this command only to adjust
for unusual circumstances such as unreliable links or specific
behavioral problems with certain clients or authentication
servers.
Syntax: dot1x re-authperiod <seconds>
no dot1x re-authperiod
Possible value: seconds: 1-65535 s
Default value: 180s
Access level: 2
Explanation: Use this command to set the period between re-
authentication attempts.
Dot1x Server-Timeout
Use this command to set the Back-End Authenticator-to-
Authentication-Server Retransmission Time for Transport Layer
Chapter 9 CLI Command Set
137
Advertisement
Table of Contents
