Access level: 0
Explanation:
Execute this command, and the following will be displayed:
wpa auth mode
encryption mode
gtk update interval
wpa-psk passphrase
Show Webserver
Use this command to display the WEB Server configuration.
Syntax: show webserver
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
WEB Status
Show VLAN Configuration
Use this command to display VLAN configuration. This
command will be valid if the VLAN module is available.
Syntax: show vlan configuration
Chapter 9 CLI Command Set
: wpa
: tkip
: 1800 seconds
: abcdefg
: enable
209