194
Chapter 9 CLI Command Set
Syntax: show net-security
Access level: 0
Explanation:
Execute this command, and the following will be displayed:
Rate Limit Status
SYN Cache Status
Network Attack Defense : Disable
Ipstack Debug
Use this command to enable IP stack print packet information.
Syntax: ipstack-debug <module>
no ipstack-debug <module>
Possible value: module: IP, ICMP, TCP, UDP, IGMP
Access level: 0
Show Ipstack-Debug
Use this command to display the IP stack debug status.
Syntax: show ipstack-debug
Access level: 0
: Enable
: Disable