Table of Contents
Advertisement
154
Chapter 9 CLI Command Set
Access level: 2
RADIUS-Acctserver Info
Use this command to set the designated accounting server's
parameter(s). Use the no form of this command to set the
designated accounting server's parameter(s) as default value(s).
Syntax: radius-acctserver info {first | second | third} [acct-
port
<port-number>]
<seconds >] [dead-time <minutes>] [retransmit <retries >]
no radius-acctserver info {first | second | third} [acct-port]
[accounting-key] [timeout] [dead-time] [retransmit]
Possible Value:
acct-port: 1-65535; default value: 1813
accounting-key {string}: string, default value: ""
timeout: 1-16 seconds; default value: 5 seconds
dead-time: 1-1440 minutes; default value: 5 minutes
retransmit: 1-6; default value: 3
Access level: 2
[accounting-key
{string}]
[timeout
Advertisement
Table of Contents
