Arp Entry; Broadcast Limit - UTStarcom WA3001 User Manual

128 Chapter 9 CLI Command Set
Access level: 2

ARP Entry

Use this command to add/delete an ARP entry.
Syntax: arp entry <ip-address> <mac-address>
no arp <ip-address>
Possible value:
xx:xx:xx:xx:xx:xx
Access level: 2

Broadcast Limit

Use this command to enable broadcast limit and set limit
packets value per second
Syntax: broadcast limit <packets>
no broadcast limit
Possible value: packets: 0-65535; 0 means broadcast limit is
disabled
Default value: 64
Access level: 2
mac-address: MAC address, format: