History; Logout; Ping - UTStarcom WA3001 User Manual

History

Use this command to show the history substitution buffer
contents. This command can be used at any configuration level.
Syntax: history
Access level: 0
Explanation: Use this command to show the command history
contents.

Logout

Use this command to terminate a terminal session. It can be
used at any configuration level.
Syntax: logout
Access level: 0

Ping

Use this command to test the network layer connectivity
between source and destination address. This command can be
used at any configuration level.
Syntax: ping <ip-address>
Access level: 2
Chapter 9 CLI Command Set 119