Explanation: Use this command to set the default route for this
AP.
IP RADIUS Source-Interface
To force RADIUS to use the IP address of a specified interface
for all outgoing RADIUS packets, use the ip radius source-
interface global configuration command.
Syntax: ip radius source-interface {wan | lan}
no ip radius source-interface
Access level: 2
Explanation: Use this command to set the RADIUS source
interface.
IP Route
Use the ip route command in Global configuration command
mode to establish static routes.
Syntax: ip route <ipaddr> <mask> <next-hop>
no ip route <ipaddr> <mask>
Possible Value:
Chapter 9 CLI Command Set
143