158
Chapter 9 CLI Command Set
no radius-server retransmit
Possible Value: retries: 1-6
Default Value: 3 times
Access level: 2
RADIUS-Server Timeout
Use this command to set the interval a router waits for a server
host to reply. Use the no form to restore the default value.
Syntax: radius-server timeout <seconds >
no radius-server timeout
Possible Value: seconds: 1-16
Default: 5 seconds
Access level: 2
SNMP Client
Use this command to set SNMP client IP address.
Syntax: snmp client <ipaddr> [mask]
no snmp client < ip>