Table of Contents
Advertisement
Syntax: show dhcp service
Access level: 0
Show DHCP Binding
Use this command to display address bindings on Dynamic
Host Configuration Protocol (DHCP) server.
Syntax: show dhcp binding [ip-address] | [manual ] | [ auto]
Possible value: ip-address: Specifies the IP address of the
DHCP client for which bindings will be displayed
Manual: Displays only manual binding's address
Auto: Displays only auto binding's address
Default value: All address bindings are shown.
Access level: 0
Show DHCP Relay
Use this command to display DHCP relay agent's configuration
parameters.
Syntax: show dhcp relay
Access level:0
Chapter 9 CLI Command Set
197
Advertisement
Table of Contents
