Optimize-108G Enable/Disable; Webserver Mode; Enable/Disable - UTStarcom WA3001 User Manual

Possible value: value range:0(means no update), 30- 65535
seconds
Default value: 1800 seconds
Access level: 2

Optimize-108g Enable/Disable

Use this command to enable or disable 108g optimization.
Syntax:optimize-108g enable/disable
Access level: 2

Webserver Mode

Enable/Disable

Use this command to enable or disable the web server.
Syntax: enable/disable
Access level: 2
Explanation: Use this command to enable or disable the web
server.
Chapter 9 CLI Command Set 185