124
Chapter 9 CLI Command Set
Clear ARP
Use this command to reset the ARP table.
Syntax: clear arp
Access level: 2
Explanation: Use this command to clear the ARP table or
delete all dynamic entries.
Clear DHCP Binding
Use this command to delete one or all automatic address
binding(s) from the Dynamic Host Configuration Protocol
(DHCP) Server database.
Syntax: clear dhcp binding [ip-address]
Possible value: ip-address: The address of the binding to be
cleared
Default value: clear all bindings
Access level: 2
Explanation: Use this command to clear DHCP server IP
address bind table.