168
Chapter 9 CLI Command Set
Syntax: webserver
Access level: 2
Wireless-Port
Use this command to enter the wireless card configuration level.
Syntax: wireless-port <port>
Possible value: ports: 1-2
Access level: 1
DHCP-pool Configuration Mode
DNS-Server
Use the dns-server DHCP pool configuration command to
specify the Domain Name System (DNS) IP servers available to
a Dynamic Host Configuration Protocol (DHCP) client. To
remove the DNS server list, use the
Syntax:
[address3].[address4]
no
dns-server
<address>
no dns-server
form of this command.
[address2]